Materiaux

Materiaux

Besoin d’un conseil? Contactez-nous.

800-268-1233

Ontario

800-361-5950

Québec

Call phones

Matériaux en Acier inoxydable

ALLIAGE / UNS DESCRIPTION C MAX NI CR MN AUTRE DENSITÉ
Austenitic
201
UNS S20100

Chromium nickel manganese steel was developed as a satisfactory alternative for Type 301 for many applications.

.15 3.5-5.5 16.0-18.0 16.0-18.0

P .06 Max

S .03 Max

N .025

Si 1.0 Max

.28
201LN
S20153

An austenitic stainless steel developed for transportation, cryogenic containment.

.03 4.0-5.0 16-17.5 6.40-7.50

P .045 Max
S .015 Max
Si .75 Max
N .10/.25
Cu 1.0 Max

.28
254 SMO
S31254

Highly resistant to crevice corrosion, pitting and chloride stress. Used in chemical, salt water, scrubbers and pulp/paper industry.

.020 17.5-18.5 19.5-20.5 1.0 Max

P .030 Max
S .010 Max
Cu .50-1.0
N .18-.22

.287
ALLIAGE / UNS DESCRIPTION C MAX NI CR MN AUTRE DENSITÉ
301
S30100

Chromium nickel steel capable of attaining high tensile strength and ductility by moderate or severe cold working.

0.15 6.0-8.0 16.0-18.0 18.0 2.0 Max

P .045 Max

S .03 Max

Si 1.0 Max

0.29
301LN
S30153

301LN is a higher nitrogen content version of 301L to compensate for the lower carbon.

0.03 6.0-8.0 16.5-18.5 2.0 Max

P .045 Max
S .03 Max
S 1.0 Max

0.29
303
S30300

Free machining grade (sulfur added) with good machinability, corrosion resistance and strength.

0.15 8.0-10.0 17.0-19.0 2.0 Max

P .20 Max
Si 1.0 Max
S .15 Min

0.282
304
S30400

Low carbon chromium nickel stainless and heat resisting steel somewhat superior to Type 302 in corrosion resistance.

0.08 8.0-10.5 18.0-20.0 2.0 Max

P .045 Max
S .03 Max
Si 1.0 Max

0.29
304H
S30409

Controlled carbon grade of 304 for increased strength at operating temperatures above 800 degrees Fahrenheit.

.04-1.0 8.0-10.5 18.0-20.0 2.0 Max

P .04 Max
Si 1.0 Max
S .03 Max

.285
304L
S30403

Very low carbon chromium nickel steel with general corrosion resistance similar to Type 304 but with superior resistance to intergranular corrosion following welding or stress relieving.

.03 8.0-12.0 18.0-20.0 2.0 Max

P .045 Max
S .03 Max
Si 1.0 Max

.29
309
S30900

High corrosion-resistant, chromium nickel grade with carbon limited to .08

.08 12.0-15.0 22.0-24.0 2.0 Max

P .045 Max
S .03 Max
Si 1.0 Max

.29
309S
S30908

Controlled carbon version of 309. 309S maintains corrosion resistance at higher operating temperatures.

.08 12.0-15.0 22.0-24.0 2.0 Max

P .045 Max
Si 1.0 Max
S .03 Max

.29
310
S31000

Similar to 309 with higher resistance to corrosion and oxidation at elevated temperatures.

.25 19.0-22.0 24.0-26.0 2.0 Max

P .045 Max
S .03 Max
Si 1.50 Max

.29
310S
S31008

Maintains good strength and corrosion resistance at higher operating temperatures.

.08 19.0-22 24.00-26.00 2.0 Max

P .045 Max
S .030 Max
Si 1.50 Max

.29
316
S31600

Chromium nickel stainless and heat resisting steel with superior corrosion resistance to other chromium nickel steels when exposed to many types of chemical corrodents; superior creep strength at elevated temperatures.

.08 10.0-14.0 16.0-18.0 2.0 Max

P .045 Max
S .03 Max
Si 1.0 Max
Mo 2.0-3.0

.29
316L
S31603

Low carbon chromium nickel stainless steel with general corrosion resistance similar to Type 316 but with superior resistance to intergranular corrosion following welding or relieving. It is recommended for use in parts which are fabricated by welding and cannot be subsequently annealed.

.03 10.0-14.0 16.0-18.0 2.0 Max

P .045 Max
S .03 Max
Si 1.0 Max
Mo 2.0-3.0

.29
321
S32100

Chromium nickel steel containing titanium. Recommended for parts fabricated by welding which cannot be subsequently annealed. Also recommended for parts to be used at temperatures between 800°F and 1850°F.

.08 9.0-12.0 17.0-19.0 2.0 Max

P .045 Max
S .03 Max
Si 1.0 Max
Ti 5xC Min

.29
ALLIAGE / UNS DESCRIPTION C MAX NI CR MN AUTRE DENSITÉ
Ferritic
409
S40900

Résistant à la corrosion à température élevée. Largement utilisée pour les systèmes de tuyaux d’échappement automobile.

0.08 10.5-11.75 0.5 Max

P .045 Max
Si 1.0 Max
S .045 Max

0.278
410
S41000

Nuance martensitique tout usage. Bonne résistance à la corrosion et usinabilité moyenne. Peut être durci entre RC35/45.

0.15 11.5-13.5 1.0 Max

P .04 Max
S 1.0 Max
Si 1.0 Max

0.28
410S
S41008

La nuance 410S est une modification à bas carbone du 410. Non durci par traitement thermique.

0.08 0.60 Max 11.5-14.5 1.0 Max

P .040 Max
Si .040 Max
S .030 Max

0.28
Martenisitic
430
S43000

Nuance générale tout usage, au chrome, bonne résistance à la corrosion, non durci par traitement thermique.

0.12 16.0-18.0 1.0 Max

P.04 Max
S .03 Max
Si 1.0 Max

0.28
439
S43035

Nuance avec addition de Titane pour utilisations à risque de corrosion par attaque de chlorures.

0.04 0.50 Max 17.0-18.0 1.0 Max

Si .60 Max
Ti .20- .60

0.278
ALLIAGE / UNS DESCRIPTION C MAX NI CR MN AUTRE DENSITÉ
2205
S32205

Nuance d’acier inox duplex (auténitique/ferritique) rehaussé d’azote et de molybdène avec une résistance à la corrosion similaire au 904L, mais avec une limite élastique près du double de celle de l’austénitique.

0.03 4.5-6.5 22.0-23-0 0.28
ALLIAGE / UNS DESCRIPTION C MAX NI CR MN AUTRE DENSITÉ
17-4PH
S17400

Precipitation hardening stainless steel with high strength and good corrosion resistance to 600°F. Used in aerospace, chemical, petrochemical, paper and metalworking industries.

.07 3.0-5.0 15.0-17.5 17.5 1.0 Max

P .04 Max
Si 1.0 Max
Cu 3.0-5.0

.28

Matériaux en Aluminium

ALLIAGE / UNS DESCRIPTION C MAX NI CR MN AUTRE DENSITÉ
3003
A93003

Non heat-treatable alloy with good corrosion resistance and moderate strength. Can develop strength with cold working.

1-1.5

Aluminum – Balance
Cu .05-.20
Fe .7 Max
Remainder Each .05 max
Remainder Total .15 Max
Si .6 Max
Zn .1

0.099
ALLIAGE / UNS DESCRIPTION C MAX NI CR MN AUTRE DENSITÉ
5052
A95052

Higher strength non-heat-treatable alloys with high fatigue strength vibration. The alloy has excellent corrosion resistance and formability.

0.15-0.35 0.1 Max

Aluminum- Balance
Cu .1 Max
Magnesium 2.2-2.8
Remainder Each .05
Remainder Total .15
Si + Fe .45 Max
Zn .1 Max

0.097
ALLIAGE / UNS DESCRIPTION C MAX NI CR MN AUTRE DENSITÉ
5086
A95086

Higher strength non-heat-treatable alloy that can be readily welded. The alloy has excellent corrosion resistance and high electrical conductivity.

0.05-0.25 0.2-0.7

Aluminum – Balance
Cu .1 Max
Mg 3.5-4.5
Si .4 Max
Fe .5 Max
Zn .25 Max
Ti .15 Max
Remainder Each .05
Remainder Total .15

0.096
ALLIAGE / UNS DESCRIPTION C MAX NI CR MN AUTRE DENSITÉ
5083
A95083

Conserve une résistance exceptionnelle après le soudage et possède la qualité la plus élevée des composites non traitables thermiquement, mais n'est pas recommandée pour une utilisation à des températures en surabondance de 65 °C.

0.05-0.25 0.4-1

Aluminum – Balance
Cu .1 Max
Mg 4-4.9
Si + Fe .4 Max
Zn .25 Max
Ti .15 Max
Remainder Each .05
Remainder Total .15

0.0961
ALLIAGE / UNS DESCRIPTION C MAX NI CR MN AUTRE DENSITÉ
6061
A96061

Medium fatigue strength heat treatable alloy with very good corrosion resistance, weldability and efficiency. Strength can be increased by cold working.

0.04-0.35 0.15 Max

Aluminum – Balance
Cu .15-.4
Mg .8-1.2
Si .4-.8
Fe .7 Max
Zn .25 Max
Ti .15 Max
Remainder Each .05
Remainder Total .15

0.0975

Matériaux en Nickel

ALLIAGE / UNS DESCRIPTION C MAX NI CR MN AUTRE DENSITÉ
400
N04400

A solid solution alloy with high strength and toughness over wide temp. ranges. Used in electronic components, springs. Corrosion resistant and oxidation resistance to 1000°F.

0.15 66.5 Max 1.0 Max

Fe 1.25 Max
Si .50 Max
Cu 31.5 Max
S .01 Max

0.318
ALLIAGE / UNS DESCRIPTION C MAX NI CR MN AUTRE DENSITÉ
Inconel
N06600

Has high corrosion and heat resistance combined with excellent strength and workability. Mainly used in corrosive atmospheres. Oxidation resistance to 2150°F.

.08 76 Max 15.5 Max .50 Max

Cu .25 Max

.304
ALLIAGE / UNS DESCRIPTION C MAX NI CR MN AUTRE DENSITÉ
36
K93601

Alloy possessing a low coefficient of thermal expansion. Used in clocks and other expansion sensitive applications.

.05 36 Nominal .25 min

Cobalt .5 nominal
Si .40 Max
S .015 Max

.291

Situées stratégiquement en Ontario et au Québec, nos infrastructures représentent plus de 150,000 pieds carrés (+ 14,000 m2) en entrepôts et lignes de production, nous permettant de servir fièrement les fabricants au Canada et aux États-Unis.

EN APPRENDRE PLUS
Délais rapides de réponse et de livraison

Délais rapides de réponse et de livraison

Métallurgistes et Spécialistes en produits sur place

Métallurgistes et Spécialistes en produits sur place

Serving Canada and the US Metal Needs

Serving Canada and the US Metal Needs